Fibre Laser Welding Helmet Gen3 by Laser Welder
Overview of the Gen3 laser welding helmet, its benefits and features
Gen3 is the best value laser welding helmet on the market, meeting the stringent Australian Standard AS1337.4 and EN207 laser eyewear standard for up to 3kW held laser welders.
Its special multi stage infrared and UV filter with variable auto dimming is unmatched on the market, along with its shielding.
Our Gen3 helmet now has a clear glass filter with the highest possible attenuation of fibre laser from and shield are not damaged by multiple laser strikes, where other far more expensive helmets may require replacement after only one high intensity laser strike.
The key benefits of Gen3 laser welding helmet are:
- It is hundreds of dollars cheaper than Tecmen, while having 10x the protection and features they simply don’t offer.
- Half the price of Kentek, Univet, Lasermet, Optrel and IPG carbon helmets. Despite being cheaper than competing helmets, our helmet has much higher protection, with the exception of the IPG Carbon helmet, which has similar protection to ours with ratings around OD8+ and EN207 D LB8.
- Note that our aluminium face shield provides protection beyond AS1337.4 and EN207’s requirements, and is rated D LB8.
- Our eyeport is one of the largest on the market, far larger than Tecmen and IPG 100LW (rebadged Tecmen). We also have 10 times the protection level.
- Our auto dimming is adjustable on the fly by simply rotating the external shade control knob. The knob is conveniently located on the upper front of the helmet. This is an important and unique feature of our helmet.
- To maximise comfort, our Gen 3 helmet has reduced weight compared to IPG’s standard laser welding helmet, and is lighter than our older Gen2 helmet.
- Padded head gear is a key feature of the Gen 3, and customers tell us it is very comfortable to wear.
- Made in Australia to control the quality. Your eyes are too precious to trust to the cheapest country other competitors use.
Scope of protection from fiber laser radiation
Our laser welding Helmet Gen2 has been designed and developed to keep your eyes and face safe from strong laser reflections from fibre laser welders up to 2kW or even 3kW. This has been tested for the YAG and fibre laser, and is tuned for high attenuation in the NIR wavelength range from 970nm to 1085nm.
It passes the “worst case” penetration test of AS 1337.4 and EN207 for “Laser Welder” brand hand held laser welders from laser-welder.net or laser-welder.com.au based on a total divergence angle of 0.8 degrees (based on a circle which contains 63% of the laser power), and 100% specular reflection at 100% power on a 2kW laser welder held at least 41cm or 16 inches from the nozzle/tip.
Protection is provided for at least 5 seconds of continuous exposure at this condition, but stop welding and/or move out of the way immediately if a strong laser reflection is suspected. Reflections are most likely on very reflective metals such as aluminium or copper, particularly when not penetrating properly such as using a large spot size or poorly performing laser welder.
Fibre laser glasses sold by laser-welder.net or laser-welder.com.au must be worn under this helmet. This provides redundancy and protection in the case of a user forgetting to flip their helmet down for example.
This helmet protects the user from Infra Red (IR) and Ultra Violet (UV) radiation when used per these instructions.
The auto darkening feature automatically changes from light to dark when welding is detected, then turns light again when welding is completed. This protects the eyes from extreme brightness caused by welding.
Multiple layers of protection
Multi layered defense system meets the standards AS/NZS1337.4, EN207 and also exceeds US OSHA requirements for laser welding:
Filter 0: Clear, protective clear plastic covers inside and out to keep out spatter, grind particles, etc.
Filter 1: Special infrared blocking “clear” filter for 700-1100nm IR.
Filter 2: Silvered multi layer filter for UV and IR
Filter 3: Auto LCD filter for visible light, adjustable for comfort
Shell 1: Frame: Reflective heat shield
Shell 2: Reflective coating
Shell 3: High temperature polymer
Suits laser cleaning, which requires auto dimming
Laser cleaning can be extremely bright, and even brighter than laser welding. Hence variable shade with auto dimming is strongly recommended for laser cleaning. Variable shading is featured as standard fitment on this helmet.
Meets and exceeds US federal OSHA requirements
Federal standard 29 CFR 1926.102(b)(2), for eye and face protection, states that “employees whose occupation or assignment requires exposure to laser beams shall be furnished suitable laser safety goggles which will protect for the specific wavelength of the laser and be of optical density (O.D.) adequate for the energy involved.” For more information see https://www.osha.gov/otm/section-3-health-hazards/chapter-6
Based on our testing, we strongly believe the required OD rating 8 of ANSI is NOT enough in isolation. OSHA’s regulation, to their credit, allows superior standards such as EN207.
Our in-house testing showed unsurpassed protection on the EN207 laser penetration test at 2kW. ANSI doesn’t test for penetration, but we’ve heard several reports of regular helmets melting due to reflections, and the risk of facial burns, so we think it’s very important. Our shell is a high temperature polmer, reflective white, with external shielding which exceeds the shells of most if not all competitors.
SPECIFICATIONS
| Viewing Window Size | 100 × 83mm |
| Effective Viewing Area including shielding | 100mm wide x 83 high |
| Optical density, OD | OD 8+ (helmet alone). Higher with glasses |
| Laser standards | AS1337.4, EN207, OSHA 1926.102 (ANSI) |
| Filter LB rating | LB 8+ |
| Shield LB rating | LB 8+ |
| Light Shade | DIN4 (VLT 5%) |
| Dark Shade | DIN5~DIN9/ DIN9~DIN13 |
| Switching Time | ≤1/10000S |
| Sensitivity Adjustment | Stepless Control |
| Delay Time | 0.1S~0.8S |
| Power supply | Lithium battery & Solar supply |
| Replaceable Lithium Battery | CR2450 x 1 piece |
| Operating Temperature | -20℃~+65℃ |
| Sensors to Weld Arc | 4 |
| Protect Grade against UVB | DIN16 (inherent in the main filter) |
| Grind | YES |
| Low battery | YES |
| Test | YES |
| Storage life | 6 years |
| Operational life | 3 years, or until visible damage |
NOTE: For auto-dimming, a CR2450 coin cell battery must be fitted before use. This is normally supplied by us with the helmet.













Reviews
There are no reviews yet.