G6-2000AC-handheld-laser

$15,500.00 Ex. GST

Laser welders are replacing TIG and MIG:

Typically 5x as fast as TIG
Easy to learn. Solves the skills shortage.
Weld quality is determined by settings.
¼ the heat input. Less damage, distortion and staining.
Deeper penetration.
Beautiful welds. No spatter. Minimal post processing.

Category: Laser Welders

Description

JOIN THE LASER WELDING REVOLUTION

Laser welders are replacing TIG and MIG:

Typically 5x as fast as TIG
Easy to learn. Solves the skills shortage.
Weld quality is determined by settings.
¼ the heat input. Less damage, distortion and staining.
Deeper penetration.

Beautiful welds. No spatter. Minimal post processing.

SUPERIOR PERFORMANCE AND VALUE

G6 laser welders have many advantages:

Easy to use interface with pre-sets and access to every parameter, unlike some big competitors.
Market leading value. Huge cost savings.
Performance: 20 um fibre for deep penetration & power density. Welds aluminium better than others.
Superior duty cycle in hot weather, 100% at 100°F
Powerful: Our range includes the world’s first refrigerant cooled 3000W laser welder
No freeze damage risk. Operates from 20°F below freezing, up to 100°F
Small footprint & light weight. Integrated wire feeder.
Ergonomic design by Laser Welder, Australia’s biggest supplier of laser welders.

SPECIFICATIONS

Functions	Weld, Clean, Cut
Penetration (MS, SS , AL)	4mm at ½”/s travel
Wire feeder	Integrated
Output power adjustment	10 – 100%
Output cable length	15 feet
Electrical cable length	14 feet
Wobble width	0-13mm. 70mm @ F800
Electrical supply	200-245V 32A 60Hz
Shielding gas	Pure argon or Nitrogen
Weight	145 lbs / 60kg
Shielding gas flow rate	32 cfm (15L/min) or higher
Input gas pressure	~30psi. 100 psi max.
Dimensions	27”x16”x38” high
Operating temperature	20 – 100°F
Operating humidity (RH%)	< 90%
Laser Class	IV (safety measures reqd)
Laser wavelength	1080+/-3nm
Laser glasses	OD6 minimum @1080nm
AND laser helmet required	OD8 minimum @1080nm
Safety interlocks for gun	Contact & trigger
Safety interlock for door	Yes. Normally closed.

LASER SAFETY NOTICE: Laser welders are amazing but are Class IV lasers, so they require special safety measures, particularly for eye safety. The key requirement is using them in an enclosed area with signage and/or interlocks to keep unprotected personnel out. Refer to OSHA 1926.54 and 1926.102 (federal regulations) in particular, plus any local regulations. We sell laser glasses and helmets which together meet OSHA and EN 207 standards for laser welders. Laser-welder.net/laser-safety contains other practical advice and insights into laser welder safety.

Use of laser cutting requires a back stop at least. Laser cleaning has similar requirements to laser welding.