G5-3000WC handheld laser

G5-3000WC Handheld Laser

Only $22,000 !! Dollar per Watt, our 3kW G5-3000WC is the BEST VALUE laser welder on the market.

• Welds thicker materials faster than all IPG Lightweld models, while costing far less.
• Double the power, but far cheaper.
• ALL parameters are easily accessible and adjustable.
• Australia’s biggest selling laser welders.

MAKE MONEY WHILE YOU WELD – 5 TIMES FASTER THAN TIG!

Typically 5 times faster than TIG. Much easier to use than MIG and TIG.
Our G5-3000WC uses the latest generation laser source for high electrical efficiency, reliability and stability.
Higher duty cycle than its main competitors thanks to an efficient internal heat pump system. Weld up to 100% duty cycle at 40°C. Massive penetration punches through 1/4” steel plate easily on demand!

POWER TO BLOW THE COMPETITION AWAY

Like our other water cooled models, G5-3000WC uses the latest generation laser source for high electrical efficiency, reliability and stability. It features a new high efficiency (high coefficient of performance) chiller heat pump with huge condenser to keep the laser at the optimal temperature and provide the highest possible duty cycle for a 3kW laser welder.

Due to the high power in the optics we use a new single wobble head. This features an increased wobble distance which is ideal for twin wire feed operation and wide fillets, enabling up to 8mm scanning distance.

THE BEST WELDS, TIME AFTER TIME

Easy to use. Easy to dial up the correct weld each time.
By using our pre-sets (which are also able to be updated quickly) welding becomes process controlled.
Our optional wire feeder provides speed control, giving beautiful, consistent welds.
Customer testing showed our welds were stronger than TIG, even with a smaller fillet, because we don’t overheat the metal.

TWIN-ROLLER WIRE FEEDER OPTION

A single wire feeder is included in the cost, but our great value twin roller wire feeder upgrade adds only $500 over the standard single roller wire feeder. This controls welding speed, giving beautiful and consistent welds. This is not required for a lot of welding, but very useful if the parts being welded have gaps larger than 0.008”. Feed rolls are grooved for .8, 1.0, 1.2 and 1.6mm welding wire. The wire size must be at least as big as the gap being welded. The welder comes with a full set of nozzles / tips to accommodate these wire sizes. Our single wire feeder dimensions are 55x27x43cm and 7kg.

LASER CLEANING OPTION

LASER CLEANING is available if required. Our touchscreen control system has welding and cleaning interfaces built in.

SPECIFICATIONS

Power	3000W (Class 4)
Laser wavelength	1080nm
Laser frequency	1-5000Hz
Power adjustment	10-100%
Welding penetration (Stainless steel )	6mm at high speed
Welding penetration (carbon steel )	6mm at high speed
Welding penetration (Aluminium alloy)	6mm at high speed
Welding spot size	0.1mm, adjustable
Welding cable length	10m
Auto wire feeder	Optional
Electrical supply	380V 40A 3 phase 5 pin
Machine power input	up to 12kW
Cooling method	Built-in heat pump

Note that laser welders are Class 4 lasers and require laser safety precautions such as eyewear and workspace. See AS 60825. For practical safety tips see https://laser-welder.com.au/laser-safety

SAFETY NOTES

1. Laser welders are Class IV lasers. They can start fires and burn skin at close range but are also dangerous to the eyes for at least 100 metres, so special safety measures are required. We provide guidance on safety, but because safety is so important our safety acknowledgement must be signed before shipping and using the laser welder.
2. You must purchase and use our safety glasses and laser welding helmet with this machine. In any case these are the best value on the market, with high and known protection levels, so you should be using them anyway.

NOTE

It is recommended to include an autotransformer (voltage stabiliser) for 3000WC, which is available at an additional cost of $900 plus GST.